Garage door will ensure you the safety of the vehicle that you keep in your garage. Nowadays, there are many garage doors that can be operated automatically. These types of doors use remote controls to operate them. If you have these types of doors you will find that these will give you conveniences such as you do not have to soak in the rain to open the door manually.
If you want to have garage door that works smoothly, you have to pay attention to its spring. The spring provides powerful tension to make the door can be operated smoothly. When you find that the spring cannot work properly, you have to change it as soon as possible. Some steps that you can follow to replace the spring of door in your garage can be seen as follows.
Before starting changing the spring in your garage door, you have to measure the spring. There are many sizes of spring to match the weight of the door in your garage. You will find that different weight of door in your garage will need different size of spring. In this case, you must replace the spring same with the broken spring in your garage door.
After you have known the measurement of the spring that will be replaced, you have to purchase the spring that broken springs you need. In this case, you can consult to the local repair company. In this place, you will also get the information about the installation of the spring.
Then, you have to use wrench and appropriate size of socket to remove the two end cones from the broken spring in your garage door. This is done to remove the broken spring from its respective end fasteners
After the broken spring is removed, you have to replace it and securely tighten the end cones. To do this, you can use two steel rods or winding tools. With these tools, you will be able to wind tension back into the spring. To get the best result, you can consult it to the guide given by the manufacturer.
After that, you have to inspect for further damage. You can do it by inspecting the door assembly. Since there are two springs in a door of a garage, you have to make sure that another spring is not affected. You have to make sure that the two springs can work well. And the last, you have to apply the lubricant to all moving parts of garage door so that it can work perfectly.